Which type of paving would be good to use next to Decking.

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • November 10, 2011 at 10:51 am #236
    Karl Harrison Landscapes Ltd
    Keymaster


    Have you ever designed or constructed a decking installation and paving on the same project.

    This question assumes the decking would be at the same finished elevation as the paving.

    Do you see any long term issues with constructing a product that expands and contracts more than the product adjacent to it?

    An example below is Standard Indian Sandstone and next to it Architectural Knotty Cedar

     

    November 11, 2011 at 2:29 pm #874
    Stuart Marler
    Participant


    This is a good questions, as I am often asked this. Sometimes its purely down to the customer’s choice and the type of decking and whether its been oiled or not.

     

    For softwood I like to go for a sandstone finish, and oiling the deck yearly, to make it look new, not silver.

     

    November 15, 2011 at 7:51 am #873
    Karl Harrison Landscapes Ltd
    Keymaster


    Hi Stuart

    Have you ever experienced issues with the decking expanding so the decking elevation has increased over the paving thus creating a nasty lip of anything from 3 to 7mm (for example) and then in the warmer weather when the boards move the opposite way, the decking is then perhaps lower than the paving.

    over to you… 😉

     

    November 15, 2011 at 9:42 am #872
    Stuart Marler
    Participant


    I havent actually, as we usually do not but the paving directly to the decking. We often leave a small amount of lip and under this a shingle base for expansion, which is covered by the decking and is hidden; to the edge of the paving.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.