Hello guys,

I'v been asked by a client to design a deck with probably a matching pergola above, as a side area to an existing patio on which to situate a hot-tub.

Because of the water, i had thought about Millboard but with no possibility of matching wood to the pergola, have ruled this out. That leaves hardwood and i was therefore thinking of Ipe. If it was you, and you had to find one wood suitable for both a deck and building a quality pergola, what would your choice be and what supplier would you use for the timber?

I appreciate that this deck will require some care and annual maintenance, but the whole thing will need to be of a piece and using hardwood will also make it possible to countersink mini LED lights into the pergola cross-members.

The deck will be at ground level rather than raised - by which i mean the bottom of the support joists will be at ground level with the deck surface around 180mm above the patio level - anticipating a single step up from patio to hot tub. This is currently laid to lawn. Deck will be around 4m x 4-6m - haven't designed it yet.

Views: 35

Reply to This

Replies to This Discussion

Hi Ivan

Iroko, all day long, looks great, affordable and achievable...

21 x 144 for the decking and 90 x 90 for the posts, the beams for the pergola could be 150 x 46 and the rafters/joists could be 100 x 46... ?

Looking forward to your design

cheers

karl 

Many thanks Karl, have sent you a PM

Reply to Discussion

RSS

Quality Timber Decking Products

Decking Network News

© 2017   Created by Karl Harrison.   Powered by

Badges  |  Report an Issue  |  Terms of Service

Related Posts for Decking NetworkRelated Posts Plugin for Decking Network ForumRelated Photos Decking Network